Your tires are the only point of contact between your INFINITI and the road — and everything from ride quality and handling precision to fuel economy and safety depends on their condition. Worn, improperly inflated, or unbalanced tires compromise all of it, often without obvious warning signs until it's too late.
INFINITI of Beachwood is your certified source for tire services in Beachwood, OH — serving Cleveland, Mentor, Solon, Westlake, and Northeast Ohio with factory-trained technicians and OEM-approved tire fitment for every INFINITI model. Schedule your appointment online today.
From routine CVT fluid exchanges to complete transmission diagnostics and repair — every service performed with factory fluids, factory tooling, and factory procedures.
INFINITI's Xtronic CVT requires genuine NS-3 CVT fluid — not generic ATF, not 'CVT compatible' fluid. NS-3 has a specific friction modifier chemistry designed for INFINITI's steel push-belt system. We perform a full drain-and-fill using only genuine INFINITI NS-3 fluid at the factory-specified interval for your model.
For INFINITI models with traditional automatic transmissions, we perform complete fluid and filter service using OEM-specification ATF. We inspect the pan, filter, and magnets for signs of internal wear before reassembly.
Shift hesitation, CVT shudder, slipping, or warning lights all require factory-level diagnostic scanning before any repair is recommended. We read manufacturer-specific transmission fault codes — not just generic OBD-II codes — and analyze live data to identify the root cause.
When repair is needed, our factory-trained technicians perform INFINITI-specific transmission work with factory tooling and procedures. We provide a complete written estimate and explain all options before any work begins.
INFINITI's CVT uses a steel push-belt running on variable-diameter pulleys at extremely tight tolerances. This system depends entirely on the correct fluid viscosity and friction modifier chemistry to operate. Generic CVT fluids — even those labeled 'CVT compatible' or 'fits Nissan/INFINITI' — have different friction characteristics that cause microscopic belt slip, heat buildup, and accelerated wear with every mile driven.
Genuine INFINITI NS-3 CVT fluid is not available at independent shops and cannot be substituted. INFINITI of Beachwood stocks and uses only NS-3 on every CVT service — the same fluid the factory fills the transmission with at the assembly line. Combined with factory-trained technicians and INFINITI-specific diagnostic tools, it's the only service your CVT was designed for.
Transmission diagnostics and repairs may require your vehicle for an extended period. INFINITI of Beachwood provides complimentary loaner vehicles for all extended service appointments. Home and office pickup and delivery are also available.
Routine CVT fluid exchange is the single most important preventive measure for long-term transmission reliability. INFINITI recommends the first CVT fluid service between 30,000 and 60,000 miles — sooner under severe-duty conditions such as towing, frequent short trips, or mountain driving.
Beyond scheduled maintenance, these symptoms indicate your INFINITI's transmission needs immediate attention. Don't defer any of them — transmission problems that are inexpensive to address at the first symptom can become catastrophic failures within thousands of miles.
Schedule a transmission inspection — we'll report honestly, at no charge.
Located at 25900 Central Parkway in Beachwood, INFINITI of Beachwood stocks genuine INFINITI NS-3 CVT fluid and OEM-specification automatic transmission fluid for every INFINITI model — with factory diagnostic tools and trained technicians to match.
We serve INFINITI owners from across Cuyahoga, Lake, Geauga, Summit, and Lorain counties. Complimentary loaner vehicles and home/office pickup and delivery make certified transmission service convenient throughout Northeast Ohio.
INFINITI of Beachwood — Service Department
25900 Central Parkway, Beachwood, OH 44122
Service: (216) 626-7801
Mon–Fri: 7:30 AM – 6:00 PM · Sat: 8:00 AM – 4:00 PM
Answers to the questions we hear most often from INFINITI owners across Northeast Ohio.
INFINITI recommends tire rotation every 5,000–7,500 miles, or at every oil change. Regular rotation extends tire life significantly and maintains balanced handling. Ask about combining rotation with your next oil change service.
Each INFINITI model has specific OEM-approved tire sizes, speed ratings, and load indices. Our technicians look up the factory specification for your exact model, year, and trim before recommending or installing any tire. Call (216) 626-7801 with your VIN for a quick answer.
Yes. Complimentary loaner vehicles are available. We also offer home and office pickup and delivery — making certified service convenient regardless of your schedule.
Yes — if the puncture is in the tread area, within safe repair limits, and the tire hasn't run flat. We perform professional flat repairs using manufacturer-approved methods. Sidewall damage and run-flat damage require replacement.
TPMS (Tire Pressure Monitoring System) alerts you when one or more tires are significantly underinflated. We diagnose and reset TPMS systems and replace sensors as needed.
Replace tires when tread depth reaches 2/32" or less, when you see sidewall damage or bulging, after running flat, or when the tire is more than 6–10 years old regardless of tread depth. We measure and report tread depth at every service visit.
Protect your CVT with genuine NS-3 fluid and factory-trained service. Don't wait until shudder becomes failure.
INFINITI recommends the first CVT fluid exchange between 30,000 and 60,000 miles under normal conditions. Severe driving conditions — towing, frequent short trips, mountain driving, or stop-and-go commuting — shorten this interval. Many technicians recommend 30,000-mile intervals in Ohio's climate. Check your owner's manual or call us at (216) 626-7801.
INFINITI's Xtronic CVT requires genuine INFINITI NS-3 CVT fluid. This is not interchangeable with generic ATF or other manufacturers' CVT fluids. NS-3 has a specific friction modifier chemistry required for proper belt operation — substitutes cause accelerated wear.
Yes, in many cases — if caught early enough. CVT shudder caused by degraded NS-3 fluid often resolves after a proper fluid exchange. If the shudder has been present for an extended period, internal belt or pulley wear may also require mechanical repair.
Yes. Any transmission service requiring extended shop time includes a complimentary loaner vehicle. Home and office pickup and delivery are also available.
Both. Our factory-trained technicians perform CVT and automatic transmission repairs using factory procedures and OEM-specification parts. We discuss all options — repair, rebuilt unit, or replacement — with complete written estimates and warranty coverage details for each before any work begins.
A proper diagnosis is the only accurate way to determine this. We perform a factory diagnostic scan, review fault codes and live data, road-test the vehicle, and inspect fluid condition before recommending any repair. We provide a complete written estimate — no work begins without your approval.
Your tires are the only point of contact between your INFINITI and the road — and everything from ride quality and handling precision to fuel economy and safety depends on their condition. Worn, improperly inflated, or unbalanced tires compromise all of it, often without obvious warning signs until it's too late.
INFINITI of Beachwood is your certified source for tire services in Beachwood, OH — serving Cleveland, Mentor, Solon, Westlake, and Northeast Ohio with factory-trained technicians and OEM-approved tire fitment for every INFINITI model. Schedule your appointment online today.
From routine CVT fluid exchanges to complete transmission diagnostics and repair — every service performed with factory fluids, factory tooling, and factory procedures.
INFINITI's Xtronic CVT requires genuine NS-3 CVT fluid — not generic ATF, not 'CVT compatible' fluid. NS-3 has a specific friction modifier chemistry designed for INFINITI's steel push-belt system. We perform a full drain-and-fill using only genuine INFINITI NS-3 fluid at the factory-specified interval for your model.
For INFINITI models with traditional automatic transmissions, we perform complete fluid and filter service using OEM-specification ATF. We inspect the pan, filter, and magnets for signs of internal wear before reassembly.
Shift hesitation, CVT shudder, slipping, or warning lights all require factory-level diagnostic scanning before any repair is recommended. We read manufacturer-specific transmission fault codes — not just generic OBD-II codes — and analyze live data to identify the root cause.
When repair is needed, our factory-trained technicians perform INFINITI-specific transmission work with factory tooling and procedures. We provide a complete written estimate and explain all options before any work begins.
INFINITI's CVT uses a steel push-belt running on variable-diameter pulleys at extremely tight tolerances. This system depends entirely on the correct fluid viscosity and friction modifier chemistry to operate. Generic CVT fluids — even those labeled 'CVT compatible' or 'fits Nissan/INFINITI' — have different friction characteristics that cause microscopic belt slip, heat buildup, and accelerated wear with every mile driven.
Genuine INFINITI NS-3 CVT fluid is not available at independent shops and cannot be substituted. INFINITI of Beachwood stocks and uses only NS-3 on every CVT service — the same fluid the factory fills the transmission with at the assembly line. Combined with factory-trained technicians and INFINITI-specific diagnostic tools, it's the only service your CVT was designed for.
Transmission diagnostics and repairs may require your vehicle for an extended period. INFINITI of Beachwood provides complimentary loaner vehicles for all extended service appointments. Home and office pickup and delivery are also available.
Routine CVT fluid exchange is the single most important preventive measure for long-term transmission reliability. INFINITI recommends the first CVT fluid service between 30,000 and 60,000 miles — sooner under severe-duty conditions such as towing, frequent short trips, or mountain driving.
Beyond scheduled maintenance, these symptoms indicate your INFINITI's transmission needs immediate attention. Don't defer any of them — transmission problems that are inexpensive to address at the first symptom can become catastrophic failures within thousands of miles.
Schedule a transmission inspection — we'll report honestly, at no charge.
Located at 25900 Central Parkway in Beachwood, INFINITI of Beachwood stocks genuine INFINITI NS-3 CVT fluid and OEM-specification automatic transmission fluid for every INFINITI model — with factory diagnostic tools and trained technicians to match.
We serve INFINITI owners from across Cuyahoga, Lake, Geauga, Summit, and Lorain counties. Complimentary loaner vehicles and home/office pickup and delivery make certified transmission service convenient throughout Northeast Ohio.
INFINITI of Beachwood — Service Department
25900 Central Parkway, Beachwood, OH 44122
Service: (216) 626-7801
Mon–Fri: 7:30 AM – 6:00 PM · Sat: 8:00 AM – 4:00 PM
Answers to the questions we hear most often from INFINITI owners across Northeast Ohio.
INFINITI recommends tire rotation every 5,000–7,500 miles, or at every oil change. Regular rotation extends tire life significantly and maintains balanced handling. Ask about combining rotation with your next oil change service.
Each INFINITI model has specific OEM-approved tire sizes, speed ratings, and load indices. Our technicians look up the factory specification for your exact model, year, and trim before recommending or installing any tire. Call (216) 626-7801 with your VIN for a quick answer.
Yes. Complimentary loaner vehicles are available. We also offer home and office pickup and delivery — making certified service convenient regardless of your schedule.
Yes — if the puncture is in the tread area, within safe repair limits, and the tire hasn't run flat. We perform professional flat repairs using manufacturer-approved methods. Sidewall damage and run-flat damage require replacement.
TPMS (Tire Pressure Monitoring System) alerts you when one or more tires are significantly underinflated. We diagnose and reset TPMS systems and replace sensors as needed.
Replace tires when tread depth reaches 2/32" or less, when you see sidewall damage or bulging, after running flat, or when the tire is more than 6–10 years old regardless of tread depth. We measure and report tread depth at every service visit.
Protect your CVT with genuine NS-3 fluid and factory-trained service. Don't wait until shudder becomes failure.
